Export limit exceeded: 81594 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (81594 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-34457 | 1 Wb2osz | 1 Dire Wolf | 2026-04-15 | 7.5 High |
| wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 694c954, contain a stack-based buffer overflow vulnerability in the function kiss_rec_byte() located in src/kiss_frame.c. When processing crafted KISS frames that reach the maximum allowed frame length (MAX_KISS_LEN), the function appends a terminating FEND byte without reserving sufficient space in the stack buffer. This results in an out-of-bounds write followed by an out-of-bounds read during the subsequent call to kiss_unwrap(), leading to stack memory corruption or application crashes. This vulnerability may allow remote unauthenticated attackers to trigger a denial-of-service condition. | ||||
| CVE-2019-25350 | 1 Xmedia Recode | 1 Xmedia Recode | 2026-04-15 | 7.5 High |
| XMedia Recode 3.4.8.6 contains a denial of service vulnerability that allows attackers to crash the application by loading a specially crafted .m3u playlist file. Attackers can create a malicious .m3u file with an oversized buffer to trigger an application crash when the file is opened. | ||||
| CVE-2025-40104 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix mailbox API compatibility by negotiating supported features There was backward compatibility in the terms of mailbox API. Various drivers from various OSes supporting 10G adapters from Intel portfolio could easily negotiate mailbox API. This convention has been broken since introducing API 1.4. Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support for IPSec which is specific only for the kernel ixgbe driver. None of the rest of the Intel 10G PF/VF drivers supports it. And actually lack of support was not included in the IPSec implementation - there were no such code paths. No possibility to negotiate support for the feature was introduced along with introduction of the feature itself. Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") increasing API version to 1.5 did the same - it introduced code supported specifically by the PF ESX driver. It altered API version for the VF driver in the same time not touching the version defined for the PF ixgbe driver. It led to additional discrepancies, as the code provided within API 1.6 cannot be supported for Linux ixgbe driver as it causes crashes. The issue was noticed some time ago and mitigated by Jake within the commit d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5"). As a result we have regression for IPsec support and after increasing API to version 1.6 ixgbevf driver stopped to support ESX MBX. To fix this mess add new mailbox op asking PF driver about supported features. Basing on a response determine whether to set support for IPSec and ESX-specific enhanced mailbox. New mailbox op, for compatibility purposes, must be added within new API revision, as API version of OOT PF & VF drivers is already increased to 1.6 and doesn't incorporate features negotiate op. Features negotiation mechanism gives possibility to be extended with new features when needed in the future. | ||||
| CVE-2025-40113 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere. | ||||
| CVE-2025-40256 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I missed the case where state creation fails between full initialization (->init_state has been called) and being inserted on the lists. In this situation, ->init_state has been called, so for IPcomp tunnels, the fallback tunnel has been created and added onto the lists, but the user state never gets added, because we fail before that. The user state doesn't go through __xfrm_state_delete, so we don't call xfrm_state_delete_tunnel for those states, and we end up leaking the FB tunnel. There are several codepaths affected by this: the add/update paths, in both net/key and xfrm, and the migrate code (xfrm_migrate, xfrm_state_migrate). A "proper" rollback of the init_state work would probably be doable in the add/update code, but for migrate it gets more complicated as multiple states may be involved. At some point, the new (not-inserted) state will be destroyed, so call xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states will have their fallback tunnel cleaned up during __xfrm_state_delete, which solves the issue that b441cf3f8c4b (and other patches before it) aimed at. All states (including FB tunnels) will be removed from the lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). | ||||
| CVE-2025-8748 | 1 Mobile-industrial-robots | 5 Mir100, Mir1000, Mir200 and 2 more | 2026-04-15 | 8.8 High |
| MiR software versions prior to version 3.0.0 are affected by a command injection vulnerability. A malicious HTTP request crafted by an authenticated user could allow the execution of arbitrary commands on the underlying operating system. | ||||
| CVE-2024-47850 | 2 Cups, Redhat | 7 Cups, Enterprise Linux, Rhel Aus and 4 more | 2026-04-15 | 7.5 High |
| CUPS cups-browsed before 2.5b1 will send an HTTP POST request to an arbitrary destination and port in response to a single IPP UDP packet requesting a printer to be added, a different vulnerability than CVE-2024-47176. (The request is meant to probe the new printer but can be used to create DDoS amplification attacks.) | ||||
| CVE-2025-5303 | 2026-04-15 | 7.2 High | ||
| The LTL Freight Quotes – Freightview Edition, LTL Freight Quotes – Daylight Edition and LTL Freight Quotes – Day & Ross Edition plugins for WordPress are vulnerable to Stored Cross-Site Scripting via the expiry_date parameter in all versions up to, and including, 1.0.11, 2.2.6 and 2.1.10 respectively, due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2025-40120 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. | ||||
| CVE-2025-1811 | 2026-04-15 | 7.3 High | ||
| A vulnerability was found in AT Software Solutions ATSVD up to 3.4.1. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /login.aspx of the component Login Endpoint. The manipulation of the argument txtUsuario leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.4.2 is able to address this issue. It is recommended to upgrade the affected component. | ||||
| CVE-2025-40118 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmod Since commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when device is gone") UBSAN reports: UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17 index 28 is out of range for type 'pm8001_phy [16]' on rmmod when using an expander. For a direct attached device, attached_phy contains the local phy id. For a device behind an expander, attached_phy contains the remote phy id, not the local phy id. I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a device behind an expander, attached_phy can be much larger than pm8001_ha->chip->n_phy (depending on the amount of phys of the expander). E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the ports has an expander connected. The expander has 31 phys with phy ids 0-30. The pm8001_ha->phy array only contains the phys of the HBA. It does not contain the phys of the expander. Thus, it is wrong to use attached_phy to index the pm8001_ha->phy array for a device behind an expander. Thus, we can only clear phy_attached for devices that are directly attached. | ||||
| CVE-2025-29313 | 2026-04-15 | 7.5 High | ||
| Use of incorrectly resolved name or reference in OpenDaylight Service Function Chaining (SFC) Subproject SFC Sodium-SR4 and below allows attackers to cause a Denial of Service (DoS). | ||||
| CVE-2025-1809 | 2026-04-15 | 7.3 High | ||
| A vulnerability was found in Pixsoft Sol up to 7.6.6c and classified as critical. This issue affects some unknown processing of the file /pix_projetos/servlet?act=login&submit=1&evento=0&pixrnd=0125021816444195731041 of the component Login Endpoint. The manipulation of the argument txtUsuario leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-1808 | 2026-04-15 | 7.3 High | ||
| A vulnerability has been found in Pixsoft E-Saphira 1.7.24 and classified as critical. This vulnerability affects unknown code of the file /servlet?act=login&tipo=1 of the component Login Endpoint. The manipulation of the argument txtUsuario leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-40130 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix data race in CPU latency PM QoS request handling The cpu_latency_qos_add/remove/update_request interfaces lack internal synchronization by design, requiring the caller to ensure thread safety. The current implementation relies on the 'pm_qos_enabled' flag, which is insufficient to prevent concurrent access and cannot serve as a proper synchronization mechanism. This has led to data races and list corruption issues. A typical race condition call trace is: [Thread A] ufshcd_pm_qos_exit() --> cpu_latency_qos_remove_request() --> cpu_latency_qos_apply(); --> pm_qos_update_target() --> plist_del <--(1) delete plist node --> memset(req, 0, sizeof(*req)); --> hba->pm_qos_enabled = false; [Thread B] ufshcd_devfreq_target --> ufshcd_devfreq_scale --> ufshcd_scale_clks --> ufshcd_pm_qos_update <--(2) pm_qos_enabled is true --> cpu_latency_qos_update_request --> pm_qos_update_target --> plist_del <--(3) plist node use-after-free Introduces a dedicated mutex to serialize PM QoS operations, preventing data races and ensuring safe access to PM QoS resources, including sysfs interface reads. | ||||
| CVE-2025-40142 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Disable bottom softirqs as part of spin_lock_irq() on PREEMPT_RT snd_pcm_group_lock_irq() acquires a spinlock_t and disables interrupts via spin_lock_irq(). This also implicitly disables the handling of softirqs such as TIMER_SOFTIRQ. On PREEMPT_RT softirqs are preemptible and spin_lock_irq() does not disable them. That means a timer can be invoked during spin_lock_irq() on the same CPU. Due to synchronisations reasons local_bh_disable() has a per-CPU lock named softirq_ctrl.lock which synchronizes individual softirq against each other. syz-bot managed to trigger a lockdep report where softirq_ctrl.lock is acquired in hrtimer_cancel() in addition to hrtimer_run_softirq(). This is a possible deadlock. The softirq_ctrl.lock can not be made part of spin_lock_irq() as this would lead to too much synchronisation against individual threads on the system. To avoid the possible deadlock, softirqs must be manually disabled before the lock is acquired. Disable softirqs before the lock is acquired on PREEMPT_RT. | ||||
| CVE-2025-40153 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: avoid soft lockup when mprotect to large memory area When calling mprotect() to a large hugetlb memory area in our customer's workload (~300GB hugetlb memory), soft lockup was observed: watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916] CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7 Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mte_clear_page_tags+0x14/0x24 lr : mte_sync_tags+0x1c0/0x240 sp : ffff80003150bb80 x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000 x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458 x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000 x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000 x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000 Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8 Soft lockup is not triggered with THP or base page because there is cond_resched() called for each PMD size. Although the soft lockup was triggered by MTE, it should be not MTE specific. The other processing which takes long time in the loop may trigger soft lockup too. So add cond_resched() for hugetlb to avoid soft lockup. | ||||
| CVE-2025-40166 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Check GuC running state before deregistering exec queue In normal operation, a registered exec queue is disabled and deregistered through the GuC, and freed only after the GuC confirms completion. However, if the driver is forced to unbind while the exec queue is still running, the user may call exec_destroy() after the GuC has already been stopped and CT communication disabled. In this case, the driver cannot receive a response from the GuC, preventing proper cleanup of exec queue resources. Fix this by directly releasing the resources when GuC is not running. Here is the failure dmesg log: " [ 468.089581] ---[ end trace 0000000000000000 ]--- [ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535) [ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535 [ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1 [ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1) [ 468.092716] ------------[ cut here ]------------ [ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe] " v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled(). As CT may go down and come back during VF migration. (cherry picked from commit 9b42321a02c50a12b2beb6ae9469606257fbecea) | ||||
| CVE-2021-22291 | 1 Abb | 2 Eibport V3 Knx, Eibport V3 Knx Gsm | 2026-04-15 | 8 High |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in ABB EIBPORT V3 KNX, ABB EIBPORT V3 KNX GSM.This issue affects EIBPORT V3 KNX: before 3.9.2; EIBPORT V3 KNX GSM: before 3.9.2. | ||||
| CVE-2025-53841 | 2 Akamai, Microsoft | 2 Guardicore Platform Agent, Windows | 2026-04-15 | 7.8 High |
| The GC-AGENTS-SERVICE running as part of Akamai´s Guardicore Platform Agent for Windows versions prior to v49.20.1, v50.15.0, v51.12.0, v52.2.0 is affected by a local privilege escalation vulnerability. The service will attempt to read an OpenSSL configuration file from a non-existent location that standard Windows users have default write access to. This allows an unprivileged local user to create a crafted "openssl.cnf" file in that location and, by specifying the path to a custom DLL file in a custom OpenSSL engine definition, execute arbitrary commands with the privileges of the Guardicore Agent process. Since Guardicore Agent runs with SYSTEM privileges, this permits an unprivileged user to fully elevate privileges to SYSTEM level in this manner. | ||||