Export limit exceeded: 378477 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378477 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378477 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74354 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | ||||
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74349 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject FITRIM ranges shorter than a cluster ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for requests that cannot discard even one allocation unit and keeps zero-cluster trims out of the group walk. | ||||
| CVE-2026-74347 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | ||||
| CVE-2026-74345 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix endpoint/socket association handling Disassociating a socket from an endpoint via siw_socket_disassoc() may release the last reference on that endpoint and free it. Therefore, don't clear the endpoints socket pointer after calling that function, but within. This fixes a: BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075) which occurred after processing a malformed MPA request during connection establishment, causing the new endpoint to be closed. | ||||
| CVE-2026-74344 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Clear rb node linkage when freeing bpf_rb_root bpf_rb_root_free() detaches the root by copying the current rb_root_cached and then replacing the live root with RB_ROOT_CACHED. It then walks the copied root and drops each object contained in the tree. This leaves the rb node state intact while dropping the object. If the object is refcounted and survives the drop, its bpf_rb_node_kern still contains an owner pointer to the freed root and stale rb tree linkage. If a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove() can incorrectly pass the owner check and call rb_erase_cached() on a node whose rb pointers belong to the old tree. Mirror the list draining behavior by marking nodes as busy while the root is being detached, then clear the rb node and release the owner before dropping the containing object. This makes surviving nodes unowned and safe to reject from remove or accept for a later add. | ||||
| CVE-2026-74343 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: kernfs: fix xattr race condition with multiple superblocks Multiple superblocks with different namespaces can share the same kernfs_node when kernfs_test_super() finds a matching root but different namespace. This means multiple inodes from different superblocks can reference the same kernfs_node->iattr->xattrs structure. The VFS layer only holds per-inode locks during xattr operations, which is insufficient to serialize concurrent xattr modifications on the shared kernfs_node. This can lead to race conditions in simple_xattr_set() where the lookup->replace/remove sequence is not atomic with respect to operations from other superblocks. Fix this by protecting xattr operations with the existing hashed kernfs_locks->open_file_mutex[] array, which is already used to protect per-node open file data. The hashed mutex array provides scalable per-node serialization (scaled by CPU count, up to 1024 locks on 32+ CPU systems) with zero memory overhead. Changes: - Rename open_file_mutex[] to node_mutex[] to reflect dual purpose - Add kernfs_node_lock_ptr() and kernfs_node_lock() helpers - Protect simple_xattr_set() calls in kernfs_xattr_set() and kernfs_vfs_user_xattr_set() with the hashed mutex - Update file.c to use new helpers via compatibility wrappers - Update documentation to explain the extended lock usage | ||||
| CVE-2026-74341 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix heap overflow from oversized firmware HAL response The firmware response dispatcher copies all synchronous HAL responses into the 4096-byte hal_buf without validating the response length. A response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow with firmware-controlled content. Add a bounds check on the response length. | ||||
| CVE-2026-74340 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication The firmware-controlled rsp->count field is used as the loop bound for indexing into the flexible rsp->regs[] array without validation against the message length. A count exceeding the actual data causes out-of- bounds reads from the heap-allocated message buffer. Add a check that count fits within the received message. | ||||
| CVE-2026-74338 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable BPF_LSM_CGROUP programs at load time The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should not attach any sleepable BPF programs there. Add support to the verifier to explicitly reject attempts to load sleepable BPF programs destined for LSM cgroup attachment. Without this, we get the following splat from a BPF_LSM_CGROUP program marked BPF_F_SLEEPABLE attached to file_open when it calls bpf_get_dentry_xattr(): BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load preempt_count: 0, expected: 0 RCU nest depth: 2, expected: 0 Call Trace: down_read+0x76/0x480 ext4_xattr_get+0x11f/0x700 __vfs_getxattr+0xf0/0x150 bpf_get_dentry_xattr+0xbb/0xf0 bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85 __cgroup_bpf_run_lsm_current+0x326/0x840 bpf_trampoline_6442534646+0x62/0x14d security_file_open+0x34/0x60 do_dentry_open+0x340/0x1260 vfs_open+0x7a/0x440 path_openat+0x1bac/0x30a0 libbpf provides a .s named section variant for every sleepable program type except lsm_cgroup, reflecting that per-cgroup LSM programs are intended to only run in a non-sleepable context. The above splat was obtained by bypassing libbpf by using bpf(2) directly. | ||||
| CVE-2026-74334 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer. | ||||
| CVE-2026-74333 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-legacy: Bound DAI link iteration create_sdw_dailinks() walks soc_dais until it finds an entry with initialised cleared, but soc_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. This was reported by KASAN: BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach] Read of size 1 Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-74332 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-74330 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs: fix lockless traversals of ->s_children Having the parent directory locked protects entries from removal by another thread, but it does *not* protect cursors from being moved around by lseek() - or freed, for that matter. | ||||
| CVE-2026-74328 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Destroy the pages content after detaching from dmabuf Sashiko points out this has gotten out of order, the mutex could still be in use through the dmabuf invalidation callbacks. Don't destroy any of the pages content until the dmabuf is fully detached. | ||||
| CVE-2026-74325 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree() after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents future RCU readers from obtaining the pointer -- it does not wait for existing readers that already hold it via rcu_dereference. The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer via rcu_dereference just before the NULL assignment, it will dereference freed memory after the kfree. struct mt76_vif_link already contains an rcu_head field that is unused at this free site -- a developer oversight, since the adjacent kfree_rcu_mightsleep call for rx_sc in the same function shows the pattern was understood. Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). | ||||
| CVE-2026-74323 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb() If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine, mt7996 driver leaks an already allocated tx token. Fix the issue releasing the token in case of error. | ||||
| CVE-2026-74321 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs() In the beginning of the loop, we try to obtain a locked delayed ref head, if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(), which can return an error pointer. If the error pointer is -EAGAIN we do a continue and go back to the beginning of the loop, which will not try again to call btrfs_select_ref_head() since 'locked_ref' is no longer NULL but it's ERR_PTR(-EAGAIN), and then we do: spin_lock(&locked_ref->lock); against a ERR_PTR(-EAGAIN) value, generating an invalid pointer dereference. Fix this by ensuring that 'locked_ref' is set to NULL when btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count' as well, to prevent infinite looping. We do this by doing a goto to the bottom of the loop that already sets 'locked_ref' to NULL and does a cond_resched(), with an increment to 'count' right before the goto. These measures were in place before the refactoring in commit 0110a4c43451 ("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally lost afterwards. | ||||
| CVE-2026-74317 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | ||||
| CVE-2026-74316 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Handle layout stid in nfsd4_drop_revoked_stid() nfsd4_drop_revoked_stid() has no SC_TYPE_LAYOUT case, so when a client sends FREE_STATEID for an admin-revoked layout stid, the default branch releases cl_lock and returns without unhashing or releasing the stid. The stid remains in the IDR and on the per-client list until the client is destroyed. Remove the layout stid from the per-client list and call nfs4_put_stid() to drop the creation reference. When the refcount reaches zero, nfsd4_free_layout_stateid() handles the remaining cleanup: cancelling the fence worker, removing from the per-file list, and freeing the slab object. | ||||