Export limit exceeded: 383540 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 383540 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (383540 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31153 | 1 Bynder | 1 Bynder | 2026-08-27 | 5.4 Medium |
| A stored cross-site scripting (XSS) vulnerability in Bynder v0.1.394 allows attackers to execute arbitrary web scripts or HTML via a crafted payload. NOTE: this is disputed by the Supplier because v0.1.394 was never a valid version number, and because there is no available information on what v0.1.394 system or environment may have been used for this XSS finding. | ||||
| CVE-2026-74736 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: reject dev-bound programs bound to a different device cls_bpf_prog_from_efd() obtained a SCHED_CLS program via bpf_prog_get_type_dev() but never verified that a device-bound (offloaded) program's bound netdev matches the TC netdev the classifier is being attached to. This let a program loaded with prog_ifindex for device A be attached via cls_bpf + skip_sw to device B; deleting device A then destroyed the program's offload state while it was still attached to device B, triggering a netdevsim WARN (panic with panic_on_warn=1). Mirror the XDP attach path (net/core/dev.c) and reject the attach with -EINVAL when a dev-bound program's bound device does not match the target device. | ||||
| CVE-2026-74737 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG On the packet reception path, the ID of the MAC Port on which the packet was received, is embedded in the RX DMA Descriptor's metadata. The ID is extracted using the helper function cppi5_desc_get_tags_ids() which fills in the 16-bit Source Tag into the 'port_id' variable. However, it is only the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID, while the upper 8-bits are Hardware-Reserved and carry an arbitrary value. With the existing logic, sporadic kernel crash is observed due to the subsequent driver code accessing out-of-bound memory because of an invalid port_id. Hence, fix the port_id extraction logic to use only the lower 8-bits of the Source Tag as the MAC Port ID. | ||||
| CVE-2026-74739 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: skip hash tables in u32_bind_class() u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1 tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit Fix this by skipping hash tables via the TC_U32_KEY(handle) check. | ||||
| CVE-2026-74743 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: inherit needed_headroom and needed_tailroom from lowerdev macvlan devices inherit hard_header_len from lowerdev during macvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying lowerdev requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached macvlans in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. | ||||
| CVE-2026-74744 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. | ||||
| CVE-2026-80546 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve CCA CPRB length and overflow checks The xcrb_msg_to_type6cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Integer overflow after CEIL4 alignment: Signed int variables could overflow during 4-byte boundary alignment, causing undersized buffer allocations or incorrect bounds checking. 2. Missing minimum size validation: The CPRBX structure is copied from userspace without verifying sufficient buffer length. Undersized buffers cause uninitialized memory access when reading structure fields like cprbx.cprb_len and cprbx.domain. 3. Arithmetic overflow in sum calculations: Adding control block and data block sizes could overflow, bypassing size checks and enabling buffer overflows. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, validating minimum control block size before copying from userspace, and detecting sum calculation overflows. | ||||
| CVE-2026-80547 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Implement a crw lock Unlike the channel_program struct, which covers synchronous I/O submissions and asynchronous interrupts, the CRW region relies exclusively on asynchronous events coming from hardware. Implement a lock to manage the list of those payloads, to ensure they are read cohesively. | ||||
| CVE-2026-80549 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Move cp cleanup out of not operational The fsm_notoper() routine is called when the device has been lost, and is (by definition) no longer operational. Since this can happen asynchronously from the normal behavior of the driver, the cleanup may happen when holding other locks in the calling sequence (notably, the cio subchannel lock). Push the cleanup of the private->cp resources to a workqueue, where it can be done out from under that lock sequence and a future patch can safely manage the locking requirements. | ||||
| CVE-2026-80552 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Ensure index for read/write regions are within range The introduction of the capability chain rightly clamped the region indexes to the range of the capabilities itself, but neglected to do so for the existing read/write regions which should also be enforced. | ||||
| CVE-2026-80553 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Cancel existing workqueues The initialization of the io_work and crw_work workqueues begs the question of whether they should be un-initialized. Add the corresponding cleanup tags in _release_dev to ensure work isn't dispatched after the private struct is free'd. | ||||
| CVE-2026-80556 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition In atmci_probe, &host->bh_work is bound with atmci_work_func, and atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all queue this work on system_bh_wq. If we remove the module, atmci_remove makes cleanup and the memory allocated for host with devm_kzalloc() is released after the remove callback returns, while the work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | atmci_interrupt | queue_work(system_bh_wq, | &host->bh_work) atmci_remove | atmci_cleanup_slot(...) | atmci_writel(host, ATMCI_IDR, ~0UL) | timer_delete_sync(&host->timer) | dma_release_channel(host->dma.chan) | free_irq(platform_get_irq(pdev, 0), host) | | atmci_work_func | // use host // devm resources released after | // remove returns, host is freed | | // use host (use-after-free) Fix it by canceling the work after all the sources that can schedule it (IRQ handler, timeout timer and DMA completion callback) have been stopped, and before proceeding with the remaining cleanup in atmci_remove. | ||||
| CVE-2026-80575 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: cs40l50-vibra - validate custom data from user space cs40l50_add() copies the custom data of an FF_PERIODIC/FF_CUSTOM effect straight from the ff_effect the user passed to EVIOCSFF, without requiring it to hold anything: work_data.custom_data = memdup_array_user(periodic->custom_data, periodic->custom_len, sizeof(s16)); work_data.custom_len = periodic->custom_len; The driver then reads two words out of that buffer: custom_data[0] as the waveform bank in cs40l50_effect_bank_set(), and custom_data[1] as the index within the bank in cs40l50_effect_index_set(). Neither read is covered by a length check, and custom_len is fully user controlled: - custom_len == 0 makes memdup_array_user() call memdup_user() with a length of zero, which returns ZERO_SIZE_PTR rather than an error, so custom_data[0] dereferences it. - custom_len == 1 allocates two bytes. A bank of ROM or RAM keeps effect->type out of the OWT case, and custom_data[1] is then read one word past the allocation. The bank value itself is also mishandled. It is masked with CS40L50_CUSTOM_DATA_MASK (0xffff) but stored in an s16, so a custom_data[0] of 0x8000 or above wraps to a negative value that passes the "bank_type >= CS40L50_WVFRM_BANK_NUM" test. cs40l50_effect_index_set() indexes vib->dsp.banks[] with it before the switch statement's default case gets a chance to reject it: base_index = vib->dsp.banks[effect->type].base_index; max_index = vib->dsp.banks[effect->type].max_index; Require the two words the driver reads to be present, and hold the masked bank in a u32 so the existing upper-bound test covers the whole range. The da7280 haptic driver already range checks custom_len this way. | ||||
| CVE-2026-80576 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject oversized IBs with per-ring packet limits On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through to ib->length_dw without a limit, while ring_emit_ib() encodes length into packet fields. Oversized values can corrupt adjacent control bits and destabilize command submission. Add a per-ring IB packet size limit helper and reject command submissions exceeding the corresponding dword limit before IB allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE, and apply the MM fallback limit for other ring types. (cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) | ||||
| CVE-2026-80578 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: core: Fix pointer desynchronization in fb_io_read() In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to a faulty user buffer), the loop adjusts the chunk size 'c' and updates the remaining 'count'. However, the hardware 'src' pointer has already been eagerly advanced by the original chunk size. If the loop is allowed to continue, the read will resume from an incorrect, over-advanced offset. Since the remaining 'count' was only decremented by the successful bytes, this desynchronization causes the next iterations to execute more hardware reads than originally bounded, eventually leading to out-of-bounds I/O reads. Fix this by breaking out of the loop immediately upon a partial copy_to_user(). A partial copy indicates a faulty user buffer, making subsequent read attempts futile. Breaking out ensures we return the number of successfully read bytes without risking out-of-bounds hardware accesses in subsequent mismatched iterations. | ||||
| CVE-2026-80579 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: clear fb_info->mode before deleting a videomode fb_set_var() can delete a mode from info->modelist when userspace passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code checks that the mode being deleted is not the current info->var and that fbcon is not using it, but it does not check fb_info->mode. fb_info->mode may still point into the modelist entry being deleted. If the entry is freed, later mode sysfs reads through show_mode() can dereference a stale pointer. Clear fb_info->mode before calling fb_delete_videomode() when it matches the mode being removed. | ||||
| CVE-2026-80583 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed. On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value sanity check catches the 4 bytes written past the enumerated item and every read of these controls fails with -EINVAL: snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow | ||||
| CVE-2026-80585 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fastopen: only mark MPTFO subflows with SYN data Passive TCP Fast Open accepts a valid-cookie SYN even when it carries no data. In that case the child socket's receive queue is intentionally left empty. mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking for queued SYN data. That made data-less TFO SYNs hit a WARN and, if the warning was non-fatal, left stale MPTFO state behind. The stale flag could later trigger a state-confusion bug in check_fully_established(). Only mark the subflow as MPTFO after confirming that an SKB was queued. Return quietly when the receive queue is empty. Note that mptcp_subflow_context's is_mptfo field is now not just about subflows where the TFO was present, but about MPTFO subflow that consumed SYN data. Only having a valid cookie but not carrying data is not really "doing TFO". | ||||
| CVE-2026-80587 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid combining some incoming suboptions Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are the rules: Which options can be used together? X: mutually exclusive O: often used together C: can be used together in some cases P: could be used together but we prefer not to (optimisations) | Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC | |------|------|------|------|------|------|------|------|------| | MPC |------|------|------|------|------|------|------|------| | MPJ | X |------|------|------|------|------|------|------| | DSS | X | X |------|------|------|------|------|------| | ADD | X | X | P |------|------|------|------|------| | RM | C | C | C | P |------|------|------|------| | PRIO | X | C | C | C | C |------|------|------| | FAIL | X | X | C | X | X | X |------|------| | FC | X | X | P | X | X | X | X |------| | RST | X | X | X | X | X | X | O | O | |------|------|------|------|------|------|------|------|------| The only difference is with the 'P': another stack could send and ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be allowed. A few points of attention: - In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is no reason to add it with a SYN. Note that even with a 4th ACK, it doesn't seem to be useful, except when IDs are known in advance via another channel. Better not to break that. - Now, combining both an MP_CAPABLE and an MP_JOIN will no longer result to a reject of the two options, but only the second suboption is ignored. That seems OK to do that for this unexpected error. At least now all inconsistent combinations are handled the same way. This could change later in next. This also means the explicit checks for having both MPC + MPJ in subflow.c will now be unreachable. That's fine, they will be removed in a follow-up patch. - In case of conflicting combinations, the extra suboption(s) is/are ignored: having such combinations either means the remote peer is buggy, or is evil. The simplest action is then taken in this case: stop processing the current suboption. - In mp_opt->suboptions, there is also a bit reserved to the checksum, which can be used in an MP_CAPABLE and a DSS. Each time a DSS option can be used in parallel with another option, the checksum can be set, so the verification is combined into a new OPTIONS_MPTCP_DSS macro. - An MP_CAPABLE ACK can carry a Data-Level Length, and an optional Checksum: they are the same as the ones found in a DSS, because a DSS cannot be used in parallel to an MP_CAPABLE. Similarly, even if there is room, a DSS cannot be used with an MP_JOIN. | ||||
| CVE-2026-80588 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: reclaim forward-allocated memory on RX path errors After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"), errors in the receive path prior to queueing skbs into the receive queue do not trigger forward-allocated memory reclaiming. Prevent forward memory from growing unboundedly in pathological drop scenarios by explicitly reclaiming memory when skbs are dropped. | ||||