Export limit exceeded: 22850 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22850 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64404 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync() iso_conn_big_sync() drops the socket lock to call hci_get_route() and then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards without re-checking that conn is still valid. While the lock is dropped, the connection can be torn down under the same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del() sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the lock and reads conn->hcon, conn may be NULL, causing a NULL pointer dereference (hcon is the first member of struct iso_conn). This path is reached from iso_sock_recvmsg() for a PA-sync broadcast sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock window can race with connection teardown driven by controller events. Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket lock and bail out if the connection went away, as already done in the sibling iso_sock_rebind_bc(). | ||||
| CVE-2026-53059 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count. | ||||
| CVE-2026-52923 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. | ||||
| CVE-2026-45984 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] | ||||
| CVE-2026-43112 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs. | ||||
| CVE-2026-64307 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? Refuse to re-try initialization if SNP is not already initialized for SNP_CONFIG. This is technically an ABI break: before if SNP initialization failed it could be transparently retriggered by this ioctl, and if no VMs were running, everything worked fine. Hopefully this is enough of a corner case that nobody will notice, but someone does, there are a few options: * do something like symbol_get() for kvm and refuse to initialize if KVM is loaded * check each cpu's HSAVE_PA for non-zero data before re-initializing * once initialization has failed, continue to refuse to initialize until the ccp module is unloaded | ||||
| CVE-2026-64308 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SEV firmware docs for SNP_VLEK_LOAD note: > On SNP_SHUTDOWN, the VLEK is deleted. That is, the initialization/shutdown wrapper here is pointless, because the firmware immediately throws away the key anyway. Instead, refuse to do anything if SNP has not been previously initialized. This is an ABI break: before, this was a no-op and almost certainly a mistake by userspace, and now it returns -ENODEV. ABI compatibility could be maintained here by simply returning 0 in the check instead. | ||||
| CVE-2026-64310 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for SEV ioctls Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? sev_move_to_init_state() is called for ioctls requiring only SEV firmware: SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on the SEV firmware. Since these commands do not require SNP to be initialized, skip it by calling __sev_platform_init_locked() which only initializes the SEV firmware. This way SNP is not Initialized at all, and HSAVE_PA is not cleared. The previous code saved any SEV initialization firmware error to init_args.error and then threw it away and hardcoded the return value of INVALID_PLATFORM_STATE regardless of the real firmware error. This patch changes it to surface the underlying error, which is hopefully both more useful and doesn't cause any problems. Note that it is still safe to call __sev_firmware_shutdown() directly: it calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not initialized. | ||||
| CVE-2026-64321 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: target: rdma: fix ndev refcount leak on queue connect nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which acquires a reference on the returned ndev via kref_get(). On the path where the host queue backlog is exceeded and the function returns NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking the kref. Fix this by adding a goto to the existing put_device label before the early return. | ||||
| CVE-2026-47476 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-09-04 | 7.5 High |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause uncontrolled resource consumption. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2026-80753 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: run deferred work on a module-owned workqueue ovpn queues several work items whose callbacks execute module text. These works currently run on the global system workqueues, so module exit has no driver-owned drain point that guarantees the callbacks have fully returned before the module text can be freed. Object references protect the objects used by the callbacks, but they do not prove that a workqueue function has returned. In particular, a worker can drop the final reference that unblocks device teardown while it is still executing ovpn code. Add a module-owned workqueue and queue all ovpn work items on it. During module exit, unregister rtnl and netlink first, flush the workqueue so ordinary ovpn workers finish, run the final RCU barrier, and destroy the workqueue last. This keeps the workqueue available for cleanup work queued from RCU callbacks, while ensuring no ovpn work item can outlive the module text. The per-device delayed keepalive work remains explicitly disabled during netdev teardown (disable_delayed_work_sync in ndo_uninit), since flush_workqueue does not flush delayed work that is still only pending on its timer. | ||||
| CVE-2026-80734 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: initialize inode mapping flags for cached inodes [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: <TASK> btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode. | ||||
| CVE-2026-80732 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ata: pata_sl82c105: fix bridge revision use-after-free pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") replaced a configuration-space read with direct access to the cached revision field, but left that access after pci_dev_put(). The bridge may therefore be freed before its revision is read. Read the revision before dropping the reference. | ||||
| CVE-2026-80745 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: fp9931: Fix VPOS/VNEG voltage selector table The VPOSNEG_table[] mapping does not match the FP9931 datasheet. The datasheet defines the VPOS/VNEG voltage mapping as: 00h-04h -> 7.04V (-7.04V) 05h -> 7.26V (-7.26V) 06h -> 7.49V (-7.49V) ... 28h-3Fh -> 15.06V (-15.06V) However, VPOSNEG_table[] has two issues: 1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the table has 6 entries of 7.04V, causing all subsequent entries to be shifted by one position. 2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but the table has only 41 entries. Any selector value above 0x28 would result in an out-of-bounds table access. Fix both issues by removing the duplicate 7.04V entry and appending the missing 23 clamped 15.06V entries, bringing the table to the correct size of 64 entries (0x00~0x3F). | ||||
| CVE-2026-80754 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix F55 transmitter electrode count typo During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts. | ||||
| CVE-2026-80726 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page Explicitly clear role.invalid when deriving a child shadow page's role from its parent to harden against bugs elsewhere in KVM, as violating KVM's invariant that invalid pages are NOT on the list of active MMU pages leads to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add() instead of list_move() when processing an invalid shadow page, i.e. makes a bad situation far worse. Yell loudly if the parent is invalid, as it means KVM has missed a validity check, i.e. KVM is attempting to map memory using an invalid/obsolete root, but continue on as the child is otherwise still a valid shadow page. ================================================================== BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] Write of size 8 at addr ff11000153dd1368 by task repro/853 CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4b/0x70 print_report+0x153/0x49c kasan_report+0xbc/0xf0 __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] mmu_alloc_root+0x141/0x320 [kvm] kvm_mmu_load+0x612/0x20f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Allocated by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x5f/0x70 kmem_cache_alloc_noprof+0xfe/0x2e0 __kvm_mmu_topup_memory_cache+0x135/0x530 [kvm] paging64_page_fault+0x318/0x1e30 [kvm] kvm_mmu_do_page_fault+0x21d/0x630 [kvm] kvm_mmu_page_fault+0x18c/0x17b0 [kvm] kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free+0xe2/0x400 kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm] kvm_mmu_free_roots+0x283/0x560 [kvm] kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2026-80735 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: ensure socket is owned by ovpn before deref sk_user_data Some subsystems, like BPF SOCKMAP, set sk_user_data without actually setting the encap_type. For this reason, we must make sure that the type is the one ovpn expects before dereferencing sk_user_data. Failing to do so may lead to out-of-bounds reads. | ||||
| CVE-2026-80737 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: synchronize DMA teardown dmaengine_terminate_all() does not wait for a running callback, so the TX callback can still touch the TX buffer after it is freed. The RX poll timer reads the RX buffers without the port lock. Switch to dmaengine_terminate_sync() and delete the RX timer before freeing the buffers. | ||||
| CVE-2026-80748 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: loongson2: Fix sg iteration in data reorder functions In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(), the for_each_sg() macro already iterates over the scatterlist entries, with 'sg' pointing to the current entry. However, the code incorrectly uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats 'sg' as an array base and indexes it again, leading to access of wrong sg entries (or out-of-bounds if the list is not an array). | ||||
| CVE-2026-80750 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: fix remaining %pOF after of_node_put() scpsys_get_bus_protection_legacy() looks up several legacy bus protection regmaps from device-tree nodes. Two error paths put the device node before checking whether the regmap lookup failed, but still pass that node to dev_err_probe() with %pOF on failure. If of_node_put() drops the last reference, the later %pOF formatting can dereference a freed device node. Keep the node reference until after the error message has been emitted in the infracfg and SMI lookup paths. Also drop the SMI node before returning when the SMI phandle is missing. | ||||