| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: fix out-of-bounds page array access on empty zisofs block
zisofs_uncompress_block()'s empty-block fast path returns
pcount << PAGE_SHIFT, ignoring the incoming poffset, unlike the
decompression path which returns bytes produced relative to poffset.
zisofs_fill_pages() uses that return to advance its page cursor, so when
the zisofs block size is below PAGE_SIZE and a sub-page block leaves
poffset partway into a page, a following empty block over-counts and
advances pages[] one element past its end, after which
"if (poffset && *pages)" reads pages[1] out of bounds. rock.c only
rejects a block-size shift > 17, so a crafted "ZF" Rock Ridge record can
set it below PAGE_SHIFT; the bug is reached by an ordinary read() of a
compressed file on such a mounted ISO9660 image.
Return the byte count relative to poffset and zero only
[poffset, PAGE_SIZE) of the first page, matching the decompression path.
The page-aligned case (poffset == 0) is unaffected.
BUG: KASAN: slab-out-of-bounds in zisofs_read_folio (fs/isofs/compress.c:290)
Read of size 8 at addr ffff88800f5eac48 by task exploit/142
zisofs_read_folio (fs/isofs/compress.c:290)
read_pages (mm/readahead.c:184)
...
filemap_read (mm/filemap.c:2814)
vfs_read (fs/read_write.c:574)
__x64_sys_pread64 (fs/read_write.c:769)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address is located 0 bytes to the right of the
allocated 8-byte region in the kmalloc-8 cache |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject restart table growth beyond U16_MAX entries
During $LogFile replay, log_replay() indexes the transaction table by the
transact_id taken from the log record header. check_log_rec() only
verifies that transact_id is non-zero and properly aligned, not its
magnitude, so a crafted image can request an arbitrarily large index.
alloc_rsttbl_from_idx() grows the table to cover that index via
extend_rsttbl(), which passes the new entry count to init_rsttbl():
rt = init_rsttbl(esize, used + add);
used + add is computed as u32 but init_rsttbl() takes a u16, and the
count is stored in struct RESTART_TABLE as a __le16. When used + add
exceeds U16_MAX it is truncated, init_rsttbl() allocates a table far
smaller than the index requires, and alloc_rsttbl_from_idx() then
dereferences and writes at the original, untruncated offset -- an
out-of-bounds access past the allocation, reachable by mounting a
crafted NTFS image.
BUG: KASAN: use-after-free in alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
Read of size 4 at addr ffff8880327ffff8 by task exploit
alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
log_replay (fs/ntfs3/fslog.c:4562)
ntfs_loadlog_and_replay (fs/ntfs3/fsntfs.c:324)
ntfs_fill_super (fs/ntfs3/super.c:1393)
get_tree_bdev_flags
vfs_get_tree
path_mount
__x64_sys_mount
A restart table is limited to U16_MAX entries by its __le16 count, so a
larger growth request is invalid input. Reject it in extend_rsttbl();
all callers already handle a NULL return. |
| A heap-based buffer overflow was found in Corosync's Totem Process Group (totempg) message reassembly. When processing fragmented multicast messages, the buffer used to reassemble fragments lacks a runtime bounds check in release builds. A network-adjacent attacker able to send crafted multicast protocol messages to the cluster could cause a heap buffer overflow with attacker-controlled data. This can crash the Corosync daemon, causing a denial of service to the entire cluster, and may potentially allow further exploitation given sufficient heap-corruption control. |
| An authenticated user with access to the NetBackup Flex OS management
shell could read arbitrary files from the underlying operating system by
supplying a specially crafted path argument to a diagnostic command.
Successful exploitation could expose sensitive system configuration and
credential material stored on the appliance. |
| A stored Cross-Site Scripting (XSS) vulnerability in the profile management functionality of T-Systems’ TAO 2.0 suite. An authenticated user could inject malicious HTML or JavaScript content into the fields containing their personal data. The content entered is stored and displayed without being properly sanitised when another user, including administrative staff, views the affected profile. Successful exploitation could allow JavaScript code to be executed in the victim’s browser, access to information available within the session, or the performance of actions using the victim’s permissions. |
| The WP Recipe Maker plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'notes' parameter in all versions up to, and including, 10.8.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Complianz GDPR/CCPA Cookie Consent Banner plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content via Elementor Cookie Blocker Regex in all versions up to, and including, 7.5.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires an administrator to approve the attacker's comment, and the site must have both the Elementor plugin installed and Complianz configured with the Twitter or Facebook cookie/script blocker enabled. |
| HCL BigFix Service Management is affected by a CORS Misconfiguration vulnerability due to improperly validated origin headers, which could allow an attacker to craft a malicious web page that interacts with the vulnerable application, enabling unauthorized access to protected resources and restricted APIs on behalf of a victim. |
| HCLSoftware AppScan 360° was affected by a Path Traversal vulnerability in the ASReportService component. Improper handling of file paths allows an authenticated attacker to read or write files outside the intended directory, potentially enabling file system structure inspection or unauthorized file modification within the application's directory scope. |
| Info-ZIP Zip 3.0, when the -T and -TT command-line options are used, allows attackers to cause a denial of service (invalid free and application crash) or possibly have unspecified other impact because of an off-by-one error. NOTE: it is unclear whether there are realistic scenarios in which an untrusted party controls the -TT value, given that the entire purpose of -TT is execution of arbitrary commands |
| An issue in Sogou Sogou Input Method < 16.3.0.3498 (fixed in 16.3.0.3498) allows a remote attacker to execute arbitrary code via the biz_helper.exe component |
| kkFileView >= 4.2.0 is vulnerable to Server-Side Request Forgery (SSRF). The cross-origin file proxy endpoint /getCorsFile is protected by TrustHostFilter against the trust.host whitelist. However, the URL parameter validated by the filter is not the same parameter the controller actually fetches: the filter validates the first non-empty parameter in a fixed priority order, while the controller only reads and fetches urlPath. By supplying both urlPath=<real target> and url=<whitelisted decoy address> in the same request, the decoy passes validation while the unvalidated real target is fetched server-side — and the response body is echoed back to the attacker. |
| kkFileView 5.0.0 through 5.0.2 allows reflected XSS via the /onlinePreview endpoint. The OnlinePreviewController passes the user-controlled page and kkagent request parameters to FreeMarker templates without sanitization, and the templates insert these values into raw JavaScript contexts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix mismatched DMA unmap size for large folios
Device-private THP migration maps migration buffers with page_size()
and records that length in dma_info->size. For a compound folio
page_size() is PAGE_SIZE << order, but two teardown sites still pass a
literal PAGE_SIZE to dma_unmap_page():
- nouveau_dmem_migrate_to_ram() on the success path, and
- nouveau_dmem_migrate_copy_one() on the copy-error path.
For an order > 0 folio this unmaps less than was mapped, leaking the
remainder of the IOMMU/IOVA mapping. The other unmap sites, in
nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already
use the saved size; use it here too. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds
Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD
queue triggers a NULL pointer dereference because the for loop that
calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the
if (pqn->q) block that initializes mqd_mgr.
The queue list can contain entries where pqn->q is NULL (kernel queues
where only pqn->kq is valid). In the original code:
if (pqn->q) {
...
mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type];
size = mqd_mgr->mqd_stride(...);
}
for (xcc = 0; xcc < num_xccs; xcc++) { // WRONG: outside if block
mqd = q->mqd + size * xcc;
r = mqd_mgr->debugfs_show_mqd(m, mqd);
}
When iterating over a queue node where pqn->q is NULL:
1. The if (pqn->q) block is skipped
2. mqd_mgr remains uninitialized (NULL from declaration)
3. The for loop executes anyway
4. mqd_mgr->debugfs_show_mqd(m, mqd) dereferences NULL
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
RIP: 0010:0x0
Call Trace:
pqm_debugfs_mqds+0x10c/0x1d0 [amdgpu]
kfd_debugfs_mqds_by_process+0x9b/0x110 [amdgpu]
seq_read_iter+0x132/0x4b0
...
Fix by moving the for loop inside the if (pqn->q) block, so mqd_mgr
and related variables are only used when properly initialized.
(cherry picked from commit 8bfe29d5c798940f797aa24135d2734c3ffce9de) |
| An authenticated, low-privileged user with access to the NetBackup Flex
OS management shell could bypass the cryptographic signature
verification step of a privileged support command by supplying a
specially formed access credential. Successful exploitation grants the
attacker an unrestricted root shell with full control over the Flex
appliance host and all hosted containers, completely compromising
confidentiality, integrity, and availability. |
| An authenticated, low-privileged user with access to the NetBackup Flex
OS management shell could supply a specially crafted input to a
privileged administrative command, causing it to execute arbitrary code
with root-level permissions. Successful exploitation grants the attacker
unrestricted control over the Flex appliance host and all hosted
containers, fully compromising confidentiality, integrity, and
availability. |
| The Ni WooCommerce Sales Report WordPress plugin before 4.2.0 does not have any authentication or authorisation checks on one of its report-printing routines, allowing unauthenticated users to retrieve WooCommerce order details and customer contact information, to target an individual order, and to search the store's orders by customer name or email address. |
| The Royal Elementor Addons WordPress plugin before 1.7.1067 does not properly sanitize and escape values submitted through its form widget before including them in the body of administrator notification emails, allowing unauthenticated attackers to inject arbitrary HTML into emails sent to the site administrator on form submission. |
| The Eventin WordPress plugin before 4.1.24 does not verify that a completed payment corresponds to the order it is applied to, confirming only that the payment gateway reports the transaction as successful, not its amount, currency, or which order it belongs to, allowing unauthenticated visitors to mark unpaid orders of any value as paid by replaying the transaction of a single genuine low-value payment. |
