In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR hang in LAG error state unload
During firmware reset in LAG mode, a race condition causes the driver
to hang indefinitely while waiting for UMR completion during device
unload. See [1].
In LAG mode the bond device is only registered on the master, so it
never sees sys_error events from the slave.
During firmware reset this causes UMR waits to hang forever on unload
as the slave is dead but the master hasn't entered error state yet, so
UMR posts succeed but completions never arrive.
Fix this by adding a sys_error notifier that gets registered before
MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().
This ensures error events reach the bond device throughout teardown.
[1]
Call Trace:
__schedule+0x2bd/0x760
schedule+0x37/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.6+0x2b5/0x4a0
__mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib]
? __xa_erase+0x4a/0xa0
? _cond_resched+0x15/0x30
? wait_for_completion+0x31/0x100
ib_dereg_mr_user+0x48/0xc0 [ib_core]
? rdmacg_uncharge_hierarchy+0xa0/0x100
destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x37/0x150 [ib_uverbs]
__uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs]
ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
remove_client_context+0x8b/0xd0 [ib_core]
disable_device+0x8c/0x130 [ib_core]
__ib_unregister_device+0x10d/0x180 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
__mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib]
auxiliary_bus_remove+0x1e/0x30
device_release_driver_internal+0x103/0x1f0
bus_remove_device+0xf7/0x170
device_del+0x181/0x410
mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core]
mlx5_disable_lag+0x253/0x260 [mlx5_core]
mlx5_lag_disable_change+0x89/0xc0 [mlx5_core]
mlx5_eswitch_disable+0x67/0xa0 [mlx5_core]
mlx5_unload+0x15/0xd0 [mlx5_core]
mlx5_unload_one+0x71/0xc0 [mlx5_core]
mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core]
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40
RDMA/mlx5: Fix UMR hang in LAG error state unload
During firmware reset in LAG mode, a race condition causes the driver
to hang indefinitely while waiting for UMR completion during device
unload. See [1].
In LAG mode the bond device is only registered on the master, so it
never sees sys_error events from the slave.
During firmware reset this causes UMR waits to hang forever on unload
as the slave is dead but the master hasn't entered error state yet, so
UMR posts succeed but completions never arrive.
Fix this by adding a sys_error notifier that gets registered before
MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().
This ensures error events reach the bond device throughout teardown.
[1]
Call Trace:
__schedule+0x2bd/0x760
schedule+0x37/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.6+0x2b5/0x4a0
__mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib]
? __xa_erase+0x4a/0xa0
? _cond_resched+0x15/0x30
? wait_for_completion+0x31/0x100
ib_dereg_mr_user+0x48/0xc0 [ib_core]
? rdmacg_uncharge_hierarchy+0xa0/0x100
destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x37/0x150 [ib_uverbs]
__uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs]
ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
remove_client_context+0x8b/0xd0 [ib_core]
disable_device+0x8c/0x130 [ib_core]
__ib_unregister_device+0x10d/0x180 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
__mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib]
auxiliary_bus_remove+0x1e/0x30
device_release_driver_internal+0x103/0x1f0
bus_remove_device+0xf7/0x170
device_del+0x181/0x410
mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core]
mlx5_disable_lag+0x253/0x260 [mlx5_core]
mlx5_lag_disable_change+0x89/0xc0 [mlx5_core]
mlx5_eswitch_disable+0x67/0xa0 [mlx5_core]
mlx5_unload+0x15/0xd0 [mlx5_core]
mlx5_unload_one+0x71/0xc0 [mlx5_core]
mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core]
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
||||||||||||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
OpenCVE Enrichment is a feature of OpenCVE that uses AI to automatically link vendors and products to CVEs. Learn more on GitHub.
| Vendors | Products |
|---|---|
|
Linux
Subscribe
|
Linux Kernel
Subscribe
|
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Wed, 27 May 2026 17:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-362 CWE-754 |
Wed, 27 May 2026 14:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR hang in LAG error state unload During firmware reset in LAG mode, a race condition causes the driver to hang indefinitely while waiting for UMR completion during device unload. See [1]. In LAG mode the bond device is only registered on the master, so it never sees sys_error events from the slave. During firmware reset this causes UMR waits to hang forever on unload as the slave is dead but the master hasn't entered error state yet, so UMR posts succeed but completions never arrive. Fix this by adding a sys_error notifier that gets registered before MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device(). This ensures error events reach the bond device throughout teardown. [1] Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40 | |
| Title | RDMA/mlx5: Fix UMR hang in LAG error state unload | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-05-27T12:18:32.270Z
Reserved: 2026-05-13T15:03:33.090Z
Link: CVE-2026-45973
Vulnrichment
No data.
NVD
Status : Awaiting Analysis
Published: 2026-05-27T14:17:14.293
Modified: 2026-05-27T14:48:03.013
Link: CVE-2026-45973
Redhat
No data.
OpenCVE Enrichment
Updated: 2026-05-27T21:30:34Z