Description
In the Linux kernel, the following vulnerability has been resolved:
libceph: fix two unsafe bare decodes in decode_lockers()
decode_lockers() in cls_lock_client.c contains two bare decode operations
that allow a malicious or compromised OSD to trigger slab-out-of-bounds
reads:
1. ceph_decode_32(p) at the num_lockers field has no preceding bounds
check. ceph_start_decoding() accepts struct_len=0 as valid -- the
internal ceph_decode_need(p, end, 0, bad) always passes -- so when an
OSD sends struct_len=0, ceph_start_decoding() returns success with
p == end. The immediately following bare ceph_decode_32(p) then reads
4 bytes past the validated buffer boundary. The garbage value is
passed directly to kzalloc_objs() as the locker count.
The sibling function decode_watchers() in osd_client.c already uses
ceph_decode_32_safe() after its own ceph_start_decoding() call.
decode_lockers() was the only site using the bare variant.
2. ceph_decode_8(p) after the decode_locker() loop has no preceding
bounds check. If an OSD crafts num_lockers such that the loop
advances p exactly to end, the subsequent bare ceph_decode_8(p) reads
one byte past the validated buffer boundary. The result is passed
directly into *type, which is used as a lock type discriminator by
callers, giving an OSD-controlled one-byte OOB read with direct
influence over the lock type field.
Fix both by replacing bare operations with their safe variants:
ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers,
err_inval)
ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type,
err_free_lockers)
The goto targets differ intentionally:
err_inval: is a new label returning -EINVAL directly. It is used for
the pre-allocation failure path where *lockers is not yet allocated
and must not be passed to ceph_free_lockers().
err_free_lockers: is the existing label. It is used for the
post-allocation failure path where *lockers is allocated and must
be freed.
ret is set to -EINVAL before ceph_decode_8_safe() so that
err_free_lockers returns the correct error code on bounds violation.
Without this, err_free_lockers would return a stale ret value (0 from
the successful decode_locker() loop), silently swallowing the error.
-EINVAL is correct for both failure paths. The data received from the
OSD is structurally malformed. -ENOMEM would misrepresent the failure
class to callers and to stable@ backporters triaging error paths.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition).
[ idryomov: trim changelog, formatting ]
libceph: fix two unsafe bare decodes in decode_lockers()
decode_lockers() in cls_lock_client.c contains two bare decode operations
that allow a malicious or compromised OSD to trigger slab-out-of-bounds
reads:
1. ceph_decode_32(p) at the num_lockers field has no preceding bounds
check. ceph_start_decoding() accepts struct_len=0 as valid -- the
internal ceph_decode_need(p, end, 0, bad) always passes -- so when an
OSD sends struct_len=0, ceph_start_decoding() returns success with
p == end. The immediately following bare ceph_decode_32(p) then reads
4 bytes past the validated buffer boundary. The garbage value is
passed directly to kzalloc_objs() as the locker count.
The sibling function decode_watchers() in osd_client.c already uses
ceph_decode_32_safe() after its own ceph_start_decoding() call.
decode_lockers() was the only site using the bare variant.
2. ceph_decode_8(p) after the decode_locker() loop has no preceding
bounds check. If an OSD crafts num_lockers such that the loop
advances p exactly to end, the subsequent bare ceph_decode_8(p) reads
one byte past the validated buffer boundary. The result is passed
directly into *type, which is used as a lock type discriminator by
callers, giving an OSD-controlled one-byte OOB read with direct
influence over the lock type field.
Fix both by replacing bare operations with their safe variants:
ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers,
err_inval)
ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type,
err_free_lockers)
The goto targets differ intentionally:
err_inval: is a new label returning -EINVAL directly. It is used for
the pre-allocation failure path where *lockers is not yet allocated
and must not be passed to ceph_free_lockers().
err_free_lockers: is the existing label. It is used for the
post-allocation failure path where *lockers is allocated and must
be freed.
ret is set to -EINVAL before ceph_decode_8_safe() so that
err_free_lockers returns the correct error code on bounds violation.
Without this, err_free_lockers would return a stale ret value (0 from
the successful decode_locker() loop), silently swallowing the error.
-EINVAL is correct for both failure paths. The data received from the
OSD is structurally malformed. -ENOMEM would misrepresent the failure
class to callers and to stable@ backporters triaging error paths.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition).
[ idryomov: trim changelog, formatting ]
Published:
2026-08-08
Score:
n/a
EPSS:
n/a
KEV:
No
Impact:
n/a
Action:
n/a
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
|||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
| Vendor | Product | Confidence | Versions | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux Kernel | 99% |
|
||||||||||||||||||||
| Linux | Linux Kernel | 99% |
|
Found an issue or want to improve our Enrichment? You can suggest it directly by opening an issue on our dedicated GitHub repository .
Remediation
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Sat, 08 Aug 2026 10:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-119 |
Sat, 08 Aug 2026 09:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ] | |
| Title | libceph: fix two unsafe bare decodes in decode_lockers() | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-08-08T09:17:45.394Z
Reserved: 2026-07-30T09:28:09.367Z
Link: CVE-2026-68082
Vulnrichment
No data.
NVD
No data.
Redhat
No data.
OpenCVE Enrichment
Updated: 2026-08-08T10:30:17Z
Weaknesses